Clutch replacement

Alles zum Hunderter

Moderatoren: Gunther, 5E-Thomas

Antworten
Nachricht
Autor
JMac
Schüler
Schüler
Beiträge: 5
Registriert: 18 Mai 2016, 09:26

Clutch replacement

#1 Beitrag von JMac »

I am looking to replace the clutch in our 1981 C2 (WB) which seems to have a 215mm plate. Does anyone know where I can get a new 215mm assembly, or if I can maybe get the 228mm assembly, will this fit? Thank you :D

Old Rusty
Vertriebsmanager
Vertriebsmanager
Beiträge: 1107
Registriert: 13 Jan 2016, 22:01

Re: Clutch replacement

#2 Beitrag von Old Rusty »

Hi,
I am sure you will find a replacement clutch. Just feed "035141033JX" to Google and you will see many offers. Some of these are not an exact replacement, so you always need to have a close look to the technical details. Depending on your location I would suggest to buy regional.
Regards,
Joerg
:?: Wenn Du es selbst instandgesetzt hast, weisst Du auch, wie lange es halten wird und warum es wieder kaputt gehen könnte :D

Audi 100 S 1970 ZX
Audi 100 GL 1972 ZJ
Audi 100 GL 1973 2T ZP
Audi 100 LS f.i. 1975 YB
Audi 200 5T 1981 WJ
VW T3 1990 NF

JMac
Schüler
Schüler
Beiträge: 5
Registriert: 18 Mai 2016, 09:26

Re: Clutch replacement

#3 Beitrag von JMac »

Thanks Joerg, that part number is recognised on a number of sites but all are marked "out of stock", it seems. The only way I see that I can get an assembly is to buy the clutch plate and pressure plate separately , but only in the 228mm diameter. I do not know if I can replace the 215mm one currently on the car with a 228mm one. Any thoughts?

Old Rusty
Vertriebsmanager
Vertriebsmanager
Beiträge: 1107
Registriert: 13 Jan 2016, 22:01

Re: Clutch replacement

#4 Beitrag von Old Rusty »

Hi,
no I cannot say if the 228 mm clutch will fit WB engine that is designed for a 215 mm clutch. Maybe you would have to change the flywheel, too. If you have not been able to find an offer I would suggest to contact Mr Andreas Kuhnert in Heusenstamm. He is primarily dealing with parts for older Audis but he has been a long time employee of LuK company, so I assume he will be able to tell you what will fit or what can be unsed as replacement.

Regards,
Joerg
:?: Wenn Du es selbst instandgesetzt hast, weisst Du auch, wie lange es halten wird und warum es wieder kaputt gehen könnte :D

Audi 100 S 1970 ZX
Audi 100 GL 1972 ZJ
Audi 100 GL 1973 2T ZP
Audi 100 LS f.i. 1975 YB
Audi 200 5T 1981 WJ
VW T3 1990 NF

JMac
Schüler
Schüler
Beiträge: 5
Registriert: 18 Mai 2016, 09:26

Re: Clutch replacement

#5 Beitrag von JMac »

Thank you again Joerg, this is exactly what I needed - as the engineers I have spoken to in the UK do not know if the 228mm unit would fit without other implications. I will contact Andreas today. Best wishes, John.

Antworten